Photonics / Fotonik

Permanent URI for this collectionhttps://hdl.handle.net/11147/2590

Browse

Now showing 1 - 20 of 120

Citation - WoS: 37
Citation - Scopus: 36
2d Vibrational Properties of Epitaxial Silicene on Ag(111)
(IOP Publishing Ltd., 2017-03) Solonenko, Dmytro; Gordan, Ovidiu D.; Le Lay, Guy; Şahin, Hasan; Cahangirov, Seymur; Zahn, Dietrich R. T.; Vogt, Patrick
The two-dimensional silicon allotrope, silicene, could spur the development of new and original concepts in Si-based nanotechnology. Up to now silicene can only be epitaxially synthesized on a supporting substrate such as Ag(111). Even though the structural and electronic properties of these epitaxial silicene layers have been intensively studied, very little is known about its vibrational characteristics. Here, we present a detailed study of epitaxial silicene on Ag(111) using in situ Raman spectroscopy, which is one of the most extensively employed experimental techniques to characterize 2D materials, such as graphene, transition metal dichalcogenides, and black phosphorous. The vibrational fingerprint of epitaxial silicene, in contrast to all previous interpretations, is characterized by three distinct phonon modes with A and E symmetries. Both, energies and symmetries of theses modes are confirmed by ab initio theory calculations. The temperature dependent spectral evolution of these modes demonstrates unique thermal properties of epitaxial silicene and a significant electron-phonon coupling. These results unambiguously support the purely two-dimensional character of epitaxial silicene up to about 300°C, whereupon a 2D-to-3D phase transition takes place. The detailed fingerprint of epitaxial silicene will allow us to identify it in different environments or to study its modifications.
Citation - WoS: 16
Citation - Scopus: 17
Ab Initio and Semiempirical Modeling of Excitons and Trions in Monolayer Tis3
(American Physical Society, 2018-08) Torun, Engin; Şahin, Hasan; Chaves, A.; Wirtz, Ludger; Peeters, François M.
We explore the electronic and the optical properties of monolayer TiS3, which shows in-plane anisotropy and is composed of a chain-like structure along one of the lattice directions. Together with its robust direct band gap, which changes very slightly with stacking order and with the thickness of the sample, the anisotropic physical properties of TiS3 make the material very attractive for various device applications. In this study, we present a detailed investigation on the effect of the crystal anisotropy on the excitons and the trions of the TiS3 monolayer. We use many-body perturbation theory to calculate the absorption spectrum of anisotropic TiS3 monolayer by solving the Bethe-Salpeter equation. In parallel, we implement and use a Wannier-Mott model for the excitons that takes into account the anisotropic effective masses and Coulomb screening, which are obtained from ab initio calculations. This model is then extended for the investigation of trion states of monolayer TiS3. Our calculations indicate that the absorption spectrum of monolayer TiS3 drastically depends on the polarization of the incoming light, which excites different excitons with distinct binding energies. In addition, the binding energies of positively and the negatively charged trions are observed to be distinct and they exhibit an anisotropic probability density distribution.
Citation - WoS: 1
Citation - Scopus: 1
Adsorption and Diffusion Characteristics of Lithium on Hydrogenated ?- and Ss-Silicene
(Beilstein-Institut Zur Forderung der Chemischen Wissenschaften, 2017-08) İyikanat, Fadıl; Kandemir, Ali; Bacaksız, Cihan; Şahin, Hasan
Using first-principles density functional theory calculations, we investigate adsorption properties and the diffusion mechanism of a Li atom on hydrogenated single-layer α- and β-silicene on a Ag(111) surface. It is found that a Li atom binds strongly on the surfaces of both α- and β-silicene, and it forms an ionic bond through the transfer of charge from the adsorbed atom to the surface. The binding energies of a Li atom on these surfaces are very similar. However, the diffusion barrier of a Li atom on H-α-Si is much higher than that on H-β-Si. The energy surface calculations show that a Li atom does not prefer to bind in the vicinity of the hydrogenated upper-Si atoms. Strong interaction between Li atoms and hydrogenated silicene phases and low diffusion barriers show that α- and β-silicene are promising platforms for Li-storage applications.
Citation - WoS: 17
Citation - Scopus: 22
Aluminum and Lithium Sulfur Batteries: a Review of Recent Progress and Future Directions
(IOP Publishing, 2021) Akgenç, Berna; Sarıkurt, Sevil; Yağmurcukardeş, Mehmet; Ersan, Fatih
Advanced materials with various micro-/nanostructures have attracted plenty of attention for decades in energy storage devices such as rechargeable batteries (ion- or sulfur based batteries) and supercapacitors. To improve the electrochemical performance of batteries, it is uttermost important to develop advanced electrode materials. Moreover, the cathode material is also important that it restricts the efficiency and practical application of aluminum-ion batteries. Among the potential cathode materials, sulfur has become an important candidate material for aluminum-ion batteries cause of its considerable specific capacity. Two-dimensional materials are currently potential candidates as electrodes from lab-scale experiments to possible pragmatic theoretical studies. In this review, the fundamental principles, historical progress, latest developments, and major problems in Li-S and Al-S batteries are reviewed. Finally, future directions in terms of the experimental and theoretical applications have prospected.
Citation - WoS: 64
Citation - Scopus: 67
Angle Resolved Vibrational Properties of Anisotropic Transition Metal Trichalcogenide Nanosheets
(Royal Society of Chemistry, 2017-03) Kong, Wilson; Bacaksız, Cihan; Chen, Bin; Wu, Kedi; Blei, Mark; Fan, Xi; Shen, Yuxia; Şahin, Hasan; Wright, David; Narang, Deepa S.; Tongay, Sefaattin
Layered transition metal trichalcogenides (TMTCs) are a new class of anisotropic two-dimensional materials that exhibit quasi-1D behavior. This property stems from their unique highly anisotropic crystal structure where vastly different material properties can be attained from different crystal directions. Here, we employ density functional theory predictions, atomic force microscopy, and angle-resolved Raman spectroscopy to investigate their fundamental vibrational properties which differ significantly from other 2D systems and to establish a method in identifying anisotropy direction of different types of TMTCs. We find that the intensity of certain Raman peaks of TiS3, ZrS3, and HfS3 have strong polarization dependence in such a way that intensity is at its maximum when the polarization direction is parallel to the anisotropic b-axis. This allows us to readily identify the Raman peaks that are representative of the vibrations along the b-axis direction. Interestingly, similar angle resolved studies on the novel TiNbS3 TMTC alloy reveal that determination of anisotropy/crystalline direction is rather difficult possibly due to loss of anisotropy by randomization distribution of quasi-1D MX6 chains by the presence of defects which are commonly found in 2D alloys and also due to the complex Raman tensor of TMTC alloys. Overall, the experimental and theoretical results establish non-destructive methods used to identify the direction of anisotropy in TMTCs and reveal their vibrational characteristics which are necessary to gain insight into potential applications that utilize direction dependent thermal response, optical polarization, and linear dichroism.
Anisotropic Tunability of Vibrational Modes in Black Phosphorus Under Uniaxial Compressive/Tensile Strain
(Wiley, 2023) Li, Hao; Kutlu, Tayfun; Carrascoso, Felix; Şahin, Hasan; Munuera, Carmen; Castellanos Gomez, Andres
Strain engineering is a powerful strategy for tuning the optical, electrical, vibrational properties of 2D nanomaterials. In this work, a four-point bending apparatus is constructed to apply both compressive and tensile strain on 2D anisotropic black phosphorus flake. Further polarized Raman spectroscopy is used to study the vibrational modes of black phosphorus flakes under uniaxial strain applied along various crystalline orientations. Here, a strong anisotropic blue/redshift of A1g, B2g, and A2g modes is found under compressive/tensile strain, respectively. Interestingly, mode A1g exhibits the maximum/minimum shift while mode B2g and mode A2g present the minimum/maximum shift when the strain is applied along armchair/zigzag direction. Density functional theory calculations are carried out to investigate the anisotropic strain response mechanism, finding that the strain-induced regulation of the PP bond angle, bond length, and especially interlayer interaction has a giant influence on the Raman shift. A four-point bending apparatus is constructed to study the effect of uniaxial strain on the vibrational property of anisotropic black phosphorus. Particularly, strong anisotropy on the Raman blueshift/redshift rate upon compressive/tensile strain can be observed, which results from the strain-induced regulation of the bond angle, bond length, and interlayer interactions according to density functional theory calculation analysis.image
Citation - WoS: 2
Citation - Scopus: 2
Atomic-scale understanding of dichlorobenzene-assisted poly 3-hexylthiophene-2,5-diyl nanowire formation mechanism
(Elsevier Ltd., 2017-04) Yağmurcukardeş, Mehmet; Kıymaz, D.; Zafer, C.; Senger, Ramazan Tuğrul; Şahin, Hasan
Low-dimensional Poly 3-hexylthiophene-2,5-diyl (P3HT) structures that serve efficient exciton dissociation in organic solar cells, play a major role in increasing the charge collection, and hence, the efficiency of organic devices. In this study, we theoretically and experimentally investigate the Dichlorobenzene (DCB)-assisted formation of P3HT nanowires. Our experiments show that the solution of DCB molecules drive randomly oriented P3HT polymers to form well-stacked nanowires by stabilizing tail-tail and π−π interactions. Here the question is how DCB molecules migrate into the P3HT layers while forming the nanowire structure. Our density functional theory-based calculations reveal that the vertical migration of the DCB molecules between P3HT layers is forbidden due to a high energy barrier that stems from strong alkyl chain-DCB interaction. In contrast to vertical diffusion, lateral diffusion of DCB molecules in between P3HT layers is much more likely. Our results show that migration of a DCB molecule occurs through the alkyl groups with a low energy barrier. Therefore, laterally diffused DCB molecules assist nucleation of top-to-top stacking of P3HT polymers and formation of well-ordered nanowires.
Citation - WoS: 66
Citation - Scopus: 66
Bilayers of Janus Wsse: Monitoring the Stacking Type: Via the Vibrational Spectrum
(Royal Society of Chemistry, 2018) Kandemir, Ali; Şahin, Hasan
Motivated by the recent successful synthesis of Janus type single layers of transition metal dichalcogenides, we investigate the stability, vibrational and electronic properties of the Janus single layer structure of WSSe and its bilayers by means of density functional theory. The structural and vibrational analysis show that the Janus single layer of WSSe forms a dynamically stable structure in the 2H phase. Owing to its non-centrosymmetric structure, the Janus WSSe single layer has two in-plane (E) and two out-of-plane (A) Raman active phonon modes. The eigen-frequencies of the prominent Raman active modes are calculated to be 277 (A) and 322 (E) cm-1. Similar to single layer WS2 and WSe2, Janus WSSe is a direct band gap semiconductor that has two electronically different faces. In addition, the possible bilayer stacking orders of the Janus WSSe single layers are investigated. It is found that there are 3 stacking types of bilayer Janus WSSe and each stacking type has distinctive Raman characteristics in its vibrational spectrum. Our results show that thanks to the vibrational characteristics, which stem from the distinctive interlayer interactions at different sides, the stability and stacking types of the bilayer of WSSe Janus structure can be monitored.
Bir Ameliyat Robotunun Denetimi için Basitleştirilmiş Dinamik Modeli
(Otomatik Kontrol Türk Milli Komitesi, 2018-09) Ayit, Orhan; Yaşır, Abdullah; Vardarlı, Eren; Kiper, Gökhan; Dede, Mehmet İsmet Can
Bu çalışmanın temel konusu minimal invaziv tipi bir ameliyat olan endoskopik hipofiz tümörü ameliyatında kullanılan endoskopun hareket denetimi için geliştirilen robotik sistemdir. Geliştirilen sistemin bu bildiride ele alınan kısmı, ameliyat sırasında sadece ameliyat bölgesi içinde endoskopu cerrahın anlık isteklerine göre yönlendiren, aktif robot yapısıdır. Söz konusu robot uzak hareket merkezli, 3 serbestlik dereceli, paralel kinematik mimariye sahiptir. Bu çalışmada robotun denetimi için uygun görülen hesaplanmış tork yöntemi için gerekli robotun dinamik analizi sunulmaktadır. Denetim algoritmasının yüksek frekansta çalışabilmesi için dinamik denklemlerde yapılan basitleştirmeler ve bunun sonucunda elde edilen hesaplama zamanı sunulmaktadır.
Citation - WoS: 22
Citation - Scopus: 22
Bodipy-Vinyl Dibromides as Triplet Sensitisers for Photodynamic Therapy and Triplet-Triplet Annihilation Upconversion
(Royal Society of Chemistry, 2021) Dartar, Suay; Üçüncü, Muhammed; Karakuş, Erman; Hou, Yuqi; Zhao, Jianzhang; Emrullahoğlu, Mustafa
We devised a new generation of halogen-based triplet sensitisers comprising geminal dibromides at the vinyl backbone of a BODIPY fluorophore. Incorporating geminal dibromides into the pi-conjugation of BODIPY enhanced intersystem crossing due to the heavy atom effect, which in turn improved the extent of excited triplet states.
Citation - WoS: 5
Citation - Scopus: 5
Breaking the Boundaries of the Goldschmidt Tolerance Factor With Ethylammonium Lead Iodide Perovskite Nanocrystals
(American Chemical Society, 2024) Güvenç, Çetin Meriç; Toso, Stefano; Ivanov, Yurii P.; Saleh, Gabriele; Balcı, Sinan; Divitini, Giorgio; Manna, Liberato
We report the synthesis of ethylammonium lead iodide (EAPbI3) colloidal nanocrystals as another member of the lead halide perovskites family. The insertion of an unusually large A-cation (274 pm in diameter) in the perovskite structure, hitherto considered unlikely due to the unfavorable Goldschmidt tolerance factor, results in a significantly larger lattice parameter compared to the Cs-, methylammonium- and formamidinium-based lead halide perovskite homologues. As a consequence, EAPbI3 nanocrystals are highly unstable, evolving to a nonperovskite delta-EAPbI3 polymorph within 1 day. Also, EAPbI3 nanocrystals are very sensitive to electron irradiation and quickly degrade to PbI2 upon exposure to the electron beam, following a mechanism similar to that of other hybrid lead iodide perovskites (although degradation can be reduced by partially replacing the EA+ ions with Cs+ ions). Interestingly, in some cases during this degradation the formation of an epitaxial interface between (EA x Cs1-x )PbI3 and PbI2 is observed. The photoluminescence emission of the EAPbI3 perovskite nanocrystals, albeit being characterized by a low quantum yield (similar to 1%), can be tuned in the 664-690 nm range by regulating their size during the synthesis. The emission efficiency can be improved upon partial alloying at the A site with Cs+ or formamidinium cations. Furthermore, the morphology of the EAPbI3 nanocrystals can be chosen to be either nanocube or nanoplatelet, depending on the synthesis conditions.
A Brief History of Silicene
(Springer Verlag, 2017-11) Cahangirov, Seymur; Şahin, Hasan; Le Lay, Guy; Rubio, Angel
Research on silicene shows a fast and steady growth that has increased our tool-box of novel 2D materials with exceptional potential applications in materials science. Especially after the experimental synthesis of silicene on substrates in 2012 it has attracted substantial interest from both theoretical and experimental communities. Every day, new people from various disciplines join this rapidly growing field. The aim of this book is to serve as a fast entry to the field to these newcomers and as a long-living reference to the growing community. To achieve this goal, the book is designed to emphasize the most crucial developments from both theoretical and experimental point of view since the starting of the silicene field back in 1994 with the first theoretical paper proposing the structure of silicene. We provide the general concepts and ideas such that the book is accessible to everybody from graduate students to senior researchers and we refer the reader interested in the detail to the relevant literature. We now start with a brief history of silicene where we highlight, in the chronological order, the important works that shaped our understanding of silicene.
Citation - WoS: 25
Citation - Scopus: 25
Colloidal Bimetallic Nanorings for Strong Plasmon Exciton Coupling
(American Chemical Society, 2020) Güvenç, Çetin Meriç; Mert Balcı, Fadime; Sarısözen, Sema; Polat, Nahit; Balcı, Sinan
Nobel-metal nanostructures strongly localize and manipulate light at nanoscale dimension by supporting surface plasmon polaritons. In fact, the optical properties of the nobel-metal nanostructures strongly depend on their morphology and composition. Until now, various metal nanostructures such as nanocubes, nanoprisms, nanorods, and recently hollow nanostructures have been demonstrated. In addition, the plasmonic field can be further enhanced at nanoparticle dimers and aggregates because of highly localized and intense optical fields, which is known as "plasmonic hot spots". However, colloidally synthesized and circular-shaped nanoring nanostructures with plasmonic hot spots are still lacking. We, herein, show for the first time that colloidal bimetallic nanorings with plasmonic nanocavities and tunable plasmon resonance wavelengths can be synthesized via colloidal synthesis and galvanic replacement reactions. In addition, in the strong coupling regime, plasmons in nanorings and excitons in J-aggregates interact strongly and nanoring-shaped colloidal plexcitonic nanoparticles are demonstrated. The results reveal that the optical properties of the nanoring and the onset of strong coupling can be tamed by the galvanic replacement reaction. Further, the plasmonic nanocavity in the nanorings has immense potential for applications in sensing and spectroscopy because of the space, enclosed by the plasmonic nanocavity, is empty and accessible to a variety of molecules, ions, and quantum dots.
Citation - WoS: 4
Citation - Scopus: 4
Color-Tunable All-Inorganic Cspbbr3 Perovskites Nanoplatelet Films for Photovoltaic Devices
(American Chemical Society, 2019) Özcan, Mehmet; Özen, Sercan; Topçu, Gökhan; Demir, Mustafa Muammer; Şahin, Hasan
Herein, we demonstrate a novel coating approach to fabricate CsPbBr3 perovskite nanoplatelet film with heat-free process via electrospraying from precursor solution. A detailed study is carried out to determine the effect of various parameters such as ligand concentration, electric field, flow rate, etc. on the optical properties. By controlling the volume ratios of the oleylamine (OAm) and oleic acid (OA), the coalescing and thickness of the resulting nanoplatelets can be readily tuned that results in control over emission in the range of 100 nm without any antisolvent crystallization or heating processes. The varying electrical field and flow rate was found as inefficient on the emission characteristics of the films. In addition, the crystal films were obtained under ambient conditions on the ITO coated glass surfaces as in the desired pattern. As a result, we demonstrated a facile and reproducible way of synthesizing and coating of CsPbBr3 perovskite nanoplatelets which is suitable for large-scale production. In this method, the ability of tuning the degree of quantum confinement for perovskite nanoplatelets is promising approach for the one-step fabrication of crystal films that may enable the use in optoelectronics.
Citation - WoS: 19
Citation - Scopus: 20
Controlling the Distribution of Oxygen Functionalities on Go and Utilization of Pedot:pss-Go Composite as Hole Injection Layer of a Solution Processed Blue Oled
(Elsevier Ltd., 2017-04) Diker, Halide; Durmaz, Gamze Belkis; Bozkurt, Hakan; Yeşil, Fatih; Varlıklı, Canan
Graphene oxide (GO) was synthesis by Tour method. Particle size distribution effects of raw graphite on the resulting structural, morphological, optical and electrical properties of GO samples and their poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) composites are studied for the graphite particle distributions of <150, 45–75 and 25–45 μm. It is determined that particle size of raw graphite have an impact on oxidation degree, the chemical nature of oxygen functional groups on GO and it also affects the lateral size of obtained GO. PEDOT:PSS-GO composites are utilized as hole injection layer (HIL) in a solution process blue organic light emitting diode. Presence of GO caused negative differential resistance (NDR) and NDR intensity was decreased with the decrease in lateral size of GO, increase in the graphite particle size and carboxyl% of obtained GO. All PEDOT:PSS-GO composite based devices presented better performance than the bare PEDOT:PSS based reference device. The maximum luminous and external quantum efficiency values of the device that contain HIL of PEDOT:PSS-GO(150) were more than 40% and 50% higher than that of the reference, respectively. Two folds of increase in these performance values were able to be reached with the concentration optimization of GO/150 in PEDOT:PSS.
Citation - WoS: 24
Citation - Scopus: 24
Defect Tolerant and Dimension Dependent Ferromagnetism in Mnse2
(Royal Society of Chemistry, 2019) Eren, İsmail; İyikanat, Fadıl; Şahin, Hasan
By performing density functional theory-based calculations, we investigate the structural, vibrational, electronic and magnetic properties of 2D monolayers, nanoribbons and quantum dots of MnSe2. Vibrational spectrum analysis reveals the dynamical stability of not only ferromagnetic but also antiferromagnetic phases of single layer MnSe2 crystal structures. Electronically, calculations show that 1T-MnSe2 is a ferromagnetic structure displaying metallic behavior. It is also found that the structure preserves its dynamical stability and metallic behavior even under the presence of high density Se vacancies. Moreover, it was predicted that, differing from the 2D MnSe2, metal-metal interaction driven reconstructions result in ferromagnetic-to-antiferromagnetic crossover in the ground state of nanoribbons and quantum dots. With its robust ferromagnetic metallic character in the 2D ultra-thin limit and dimension-dependent magnetic properties, MnSe2 is an important candidate for spintronic device applications.
Citation - WoS: 10
Citation - Scopus: 12
The Effect of Dopa Hydroxyl Groups on Wet Adhesion To Polystyrene Surface: an Experimental and Theoretical Study
(Elsevier, 2020) Yıldız, Remziye; Özen, Sercan; Şahin, Hasan; Akdoğan, Yaşar
Mussels wet adhesive performance has been arousing curiosity for a long time. It is found that 3,4-dihydroxyphenylalanine (DOPA) is responsible for adhesive properties of mussels. Despite a large body of research characterizing the interactions DOPA with hydrophilic surfaces, relatively few works have addressed the mechanism of interactions with hydrophobic surfaces. The benzene ring of DOPA is the main attributor to the adhesion on hydrophobic polystyrene (PS) surface. However, here we showed that two hydroxyl groups of catechol have also effects on wet adhesion. We studied wet adhesive properties of DOPA, tyrosine and phenylalanine functionalized PEG polymers, PEG-(N-Boc-L-DOPA)(4), PEG-(N-Boc-L-Tyrosine)(4), PEG-(N-Boc-L-Phenylalanine)(4), on spin labeled PS nanobeads (SL-PS) by electron paramagnetic resonance (EPR) spectroscopy. Surface coverage ratio of SL-PS upon additions of PEG-(N-Boc-L-DOPA)(4), PEG-(N-Boc-L-Tyrosine)(4) and PEG-(N-Boc-L-Phenylalanine)(4) showed that SL-PS was covered with 70%, 50% and 0%, respectively. This showed that spontaneous wet adhesion on PS increases with the number of amino acids hydroxyl groups. This is also supported with the density functional theory (DFT) energy calculations and ab-initio molecular dynamics (AIMD) simulations. In water, interactions between water molecules and hydroxyl groups on the catechol induce catechol adhesion via 7C-7C stacking between the catechol and double styrene rings which were already tilted out with water.
The Effect of Imide Substituents on the Excited State Properties of Perylene Diimide Derivatives
(Fırat Üniversitesi, 2022) Aksoy, Erkan; Danos, Andrew; Li, Chunyong; Monkman, Andrew; Varlıklı, Canan
Solid state optical properties of fluorescent materials are important for many photonic devices such as organic light emitting diodes, frequency down-converters or luminescent solar concentrators. Perylene diimides (PDIs) represent one of the most popular organic semiconductors which find application in such photonic device applications. In this study, photophysical properties of two dibrominated PDI (DiBrPDIs), one of which contains a branched alkyl chain (2-ethylhexyl, 2-EH) and the other with an aromatic substituent (diisopropylphenyl, DIA) at the imide positions are comparatively studied. We report their absorption and photoluminescence, lifetime and photoluminescence quantum yield (PLQY), as well as photoinduced absorption properties (PIA) examined by fs-transient absorption spectroscopy. Having the same ? conjugated system, DiBrPDIDIA and DiBrPDI-2EH exhibited identical absorption and photoluminescence (PL) spectra in chloroform (?abs:527 nm and ?PL:552 nm). However, in film phase, DiBrPDI-DIA (?PL-DIA:596 nm; PLQY:73.4%) presented a shorter PL wavelength with a higher PLQY than that of DiBrPDI-2EH (?PL-2EH:649 nm; PLQY:36.7%). Bond lengths and core bending angles of PDI derivatives were calculated using Chem3D pro software. It was determined that the 2,6-diisopropylphenyl group in DiBrPDI(DIA) extends a distance of about 6.8 Å out from the imide positions, providing more effective steric protection from aggregation than the smaller 2EH group.
Citation - WoS: 132
Citation - Scopus: 135
Electrically Switchable Metadevices Via Graphene
(American Association for the Advancement of Science, 2018-01) Balcı, Osman; Kakenov, Nurbek; Karademir, Ertuğrul; Balcı, Sinan; Çakmakyapan, Semih; Polat, Emre O.; Çağlayan, Hümeyra; Özbay, Ekmel; Kocabaş, Çoşkun
Metamaterials bring subwavelength resonating structures together to overcome the limitations of conventional materials. The realization of active metadevices has been an outstanding challenge that requires electrically reconfigurable components operating over a broad spectrum with a wide dynamic range. However, the existing capability of metamaterials is not sufficient to realize this goal. By integrating passive metamaterials with active graphene devices, we demonstrate a new class of electrically controlled active metadevices working in microwave frequencies. The fabricated active metadevices enable efficient control of both amplitude (>50 dB) and phase (>90°) of electromagnetic waves. In this hybrid system, graphene operates as a tunable Drude metal that controls the radiation of the passive metamaterials. Furthermore, by integrating individually addressable arrays of metadevices, we demonstrate a new class of spatially varying digital metasurfaces where the local dielectric constant can be reconfigured with applied bias voltages. In addition, we reconfigure resonance frequency of split-ring resonators without changing its amplitude by damping one of the two coupled metasurfaces via graphene. Our approach is general enough to implement various metamaterial systems that could yield new applications ranging from electrically switchable cloaking devices to adaptive camouflage systems.
Citation - WoS: 4
Citation - Scopus: 4
Electromagnetically Induced Transparency and Absorption Cross-Over With a Four-Level Rydberg System
(IOP Publishing, 2022) Oyun, Yağız; Çakır, Özgür; Sevinçli, Sevilay
Electromagnetically induced transparency (EIT) and absorption (EIA) are quantum coherence phenomena which result from the interference of excitation pathways. Combining these with Rydberg atoms have opened up many possibilities for various applications. We introduce a theoretical model to study Rydberg-EIT and Rydberg-EIA effects in cold Cs and Rb atomic ensembles in a four-level ladder type scheme taking into account van der Waals type interactions between the atoms. The proposed many-body method for analysis of such systems involves a self-consistent mean field approach and it produces results which display a very good agreement with recent experiments. Our calculations also successfully demonstrate experimentally observed EIT-EIA cross-over in the Rb case. Being able to simulate the interaction effects in such systems has significant importance, especially for controlling the optical response of these.

Browse

Browsing Photonics / Fotonik by Access Right "info:eu-repo/semantics/openAccess"