Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/4719

Browse

Now showing 1 - 20 of 324

Citation - WoS: 1
Citation - Scopus: 1
Adsorption and Diffusion Characteristics of Lithium on Hydrogenated ?- and Ss-Silicene
(Beilstein-Institut Zur Forderung der Chemischen Wissenschaften, 2017-08) İyikanat, Fadıl; Kandemir, Ali; Bacaksız, Cihan; Şahin, Hasan; 04.04. Department of Photonics; 04. Faculty of Science; 01. Izmir Institute of Technology
Using first-principles density functional theory calculations, we investigate adsorption properties and the diffusion mechanism of a Li atom on hydrogenated single-layer α- and β-silicene on a Ag(111) surface. It is found that a Li atom binds strongly on the surfaces of both α- and β-silicene, and it forms an ionic bond through the transfer of charge from the adsorbed atom to the surface. The binding energies of a Li atom on these surfaces are very similar. However, the diffusion barrier of a Li atom on H-α-Si is much higher than that on H-β-Si. The energy surface calculations show that a Li atom does not prefer to bind in the vicinity of the hydrogenated upper-Si atoms. Strong interaction between Li atoms and hydrogenated silicene phases and low diffusion barriers show that α- and β-silicene are promising platforms for Li-storage applications.
Citation - Scopus: 19
Advanced Sensor and Detection Materials
(John Wiley and Sons Inc., 2014) Tiwari, Ashutosh; Demir, Mustafa Muammer; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
Presents a comprehensive and interdisciplinary review of the major cutting-edge technology research areas-especially those on new materials and methods as well as advanced structures and properties-for various sensor and detection devices. The development of sensors and detectors at macroscopic or nanometric scale is the driving force stimulating research in sensing materials and technology for accurate detection in solid, liquid, or gas phases; contact or non-contact configurations; or multiple sensing. The emphasis on reduced-scale detection techniques requires the use of new materials and methods. These techniques offer appealing perspectives given by spin crossover organic, inorganic, and composite materials that could be unique for sensor fabrication. The influence of the length, composition, and conformation structure of materials on their properties, and the possibility of adjusting sensing properties by doping or adding the side-groups, are indicative of the starting point of multifarious sensing. The role of intermolecular interactions, polymer and ordered phase formation, as well as behavior under pressure and magnetic and electric fields are also important facts for processing ultra-sensing materials. The 15 chapters written by senior researchers in Advanced Sensor and Detection Materials cover all these subjects and key features under three foci: 1) principals and perspectives, 2) new materials and methods, and 3) advanced structures and properties for various sensor devices. © 2014 Scrivener Publishing LLC. All rights reserved.
Citation - Scopus: 3
Advances and Future Perspective of Graphene Field Effect Transistors (gfets) for Medical Diagnostics and Point-Of Tools
(World Scientific Publishing, 2022) İnanç, Dilce; Mutlu, Mustafa Umut; Karabacak, Soner; Yıldız, Ümit Hakan; 04.04. Department of Photonics; 04.01. Department of Chemistry; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of Technology
Recently, major focus has been centered to enhance the capability of graphenebased devices and to facilitate utilization of graphene for biological applications by lowering its toxicity. In this chapter, from synthesis to applications, many of the conspicuous characteristics of graphene have been elaborately reviewed. We primarily focused on graphene-based field effect transistor (FET) for medical diagnostics and point-of-care applications. The device configurations and their application potential as well as sensing capability of various graphene FETs (GFETs) have been discussed. Here, we have also presented several aspects and advantages of GFETs in medical applications while discussing their pros and cons in commercialization. We address the advances and challenges for GFET-based sensing platforms for the medical applications and elaborate the combination strategy of GFETs with the existing commercial systems. © 2023 by World Scientific Publishing Co. Pte. Ltd.
Citation - WoS: 46
Citation - Scopus: 50
Advances in Electrospun Fiber-Based Flexible Nanogenerators for Wearable Applications
(Wiley-VCH Verlag, 2021) Arıca, Tuğçe Aybüke; Isık, Tuğba; Güner, Tuğrul; Horzum, Nesrin; Demir, Mustafa M.; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
In today's digital age, the need and interest in personal and portable electronics shows a dramatic growth trend in daily life parallel to the developments in sensors technologies and the internet. Wearable electronics that can be attached to clothing, accessories, and the human body are one of the most promising subfields. The energy requirement for the devices considering the reduction in device sizes and the necessity of being flexible and light, the existing batteries are insufficient and nanogenerators have been recognized a suitable energy source in the last decade. The mechanical energy created by the daily activities of the human body is an accessible and natural energy source for nanogenerators. Fiber-structured functional materials contribute to the increase in energy efficiency due to their effective surface to volume ratio while providing the necessary compatibility and comfort for the movements in daily life with its flexibility and lightness. Among the potential solutions, electrospinning stands out as a promising technique that can meet these requirements, allowing for simple, versatile, and continuous fabrication. Herein, wearable electronics and their future potential, electrospinning, and its place in energy applications are overviewed. Moreover, piezoelectric, triboelectric, and hybrid nanogenerators fabricated or associated with electrospun fibrous materials are presented.
Citation - WoS: 59
Citation - Scopus: 63
Amidoxime Functionalized Polymers of Intrinsic Microporosity (pim-1) Electrospun Ultrafine Fibers for Rapid Removal of Uranyl Ions From Water
(Elsevier Ltd., 2019) Satılmış, Bekir; Isık, Tuğba; Demir, Mustafa Muammer; Uyar, Tamer; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
The Polymers of Intrinsic Microporosity (PIM-1) is considered as one of the most promising polymer candidates for adsorption applications owing to its high surface area and the ability to tailor the functionality for the targeted species. This study reports a facile method for the preparation of amidoxime functionalized PIM-1 fibrous membrane (AF-PIM-FM) by electrospinning technique and its practical use for the extraction of U(VI) ions from aqueous systems via column sorption under continuous flow. Fibrous membrane form of amidoxime functionalized PIM-1 (AF-PIM-FM) was prepared by electrospinning method owing to its excellent processability in dimethylformamide. Bead-free and uniform fibers were obtained as confirmed by SEM imaging and average fiber diameter was 1.69 +/- 0.34 mu m for AF-PIM-FM. In addition, electrospun PIM-1 fibrous membrane (PIM-FM) was prepared as a control group. Structural and thermal characterization of powder and membrane forms of the materials were performed using FT-IR, H-1 NMR, XPS, Elemental analyses, TGA, and DSC. The porosity of the samples was measured by N-2 sorption isotherms confirming amidoxime PIM-1 still maintain their porosity after functionalization. Amidoxime functionality along with membrane structure makes AF-PIM-FM a promising material for uranyl adsorption. First, a comparison between powder and membrane form of amidoxime functionalized PIM-1 was investigated using batch adsorption process. Although membrane form has shown slightly lower adsorption performance in the batch adsorption process, the advantage of using the membrane in column adsorption processes makes membrane form more feasible for real applications. In addition, amidoxime modification enhanced the uranium adsorption ability of PIM-FM up to 20 times. The effect of initial concentration and pH were investigated along with regeneration of the adsorbents. AF-PIM-FM was successfully used for five adsorption-desorption cycles without having any damage on the fibrous structure.
Citation - WoS: 3
Citation - Scopus: 3
Amperometric Detection of Nh3 by Aromatic Sam-Modified Graphene
(IEEE, 2023) Yağmurcukardeş, Nesli; Bayram, Abdullah; Aydın, Hasan; Can, Mustafa; Demiç, Şerafettin; Açıkbaş, Yaşar; Çelebi, Cem; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of Technology
Ammonia (NH3) is a toxic substance resulting in various acute and chronic effects on individuals. NH3 detection, monitoring methods, and detection tools are desperately needed. In this work, we improved the NH3 sensing capabilities of grapheme (GP) films deposited by chemical vapor deposition (CVD) by modifying aromatic self-assembled monolayer (SAM) molecules such as 5-[(3-methylphenyl) (phenyl) amino] isophthalic acid (MeIPA) and 5-(diphenyl)amino] isophthalic acid (PhIPA) on amperometric detection method. Morphological investigations of the films were carried out by optical and scanning electron microscopy (SEM). Surface potential was characterized with Kelvin probe force microscopy (KPFM), and vibrational properties were characterized with Raman spectroscopy. MeIPA modification increased NH3 uptake by two times compared to unmodified GP. The results indicated that the SAM modification enhanced NH3 molecule adsorption and improved its periodic reversible and reproducible response using the amperometric detection system, indicating that SAM molecules might be a feasible probe for NH3. © 2001-2012 IEEE.
Amwc 2013: Advanced Materials World Congress (izmir, Turkey, September 16–19, 2013)
(Walter de Gruyter GmbH, 2013-03) Demir, Mustafa Muammer; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
Recent decades witnessed an explosion of new materials and new ways to fabricate and use naturally occurring and engineered materials. Scientists and engineers from various fields refer to this development to understand materials structure fundamentally and accordingly material properties and function. Currently, it is crucial to provide a global platform for researchers and engineers from both academia and industry to present their research results and activities with a special attention from an interdisciplinary aspect of advanced materials.
Citation - WoS: 6
Citation - Scopus: 6
Anisotropic Etching of Cvd Grown Graphene for Ammonia Sensing
(Institute of Electrical and Electronics Engineers Inc., 2022-03) Yağmurcukardeş, Nesli; Bayram, Abdullah; Aydın, Hasan; Yağmurcukardeş, Mehmet; Açıkbaş, Yaser; Peeters, François M.; Çelebi, Cem; 04.04. Department of Photonics; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of Technology
Bare chemical vapor deposition (CVD) grown graphene (GRP) was anisotropically etched with various etching parameters. The morphological and structural characterizations were carried out by optical microscopy and the vibrational properties substrates were obtained by Raman spectroscopy. The ammonia adsorption and desorption behavior of graphene-based sensors were recorded via quartz crystal microbalance (QCM) measurements at room temperature. The etched samples for ambient NH3 exhibited nearly 35% improvement and showed high resistance to humidity molecules when compared to bare graphene. Besides exhibiting promising sensitivity to NH3 molecules, the etched graphene-based sensors were less affected by humidity. The experimental results were collaborated by Density Functional Theory (DFT) calculations and it was shown that while water molecules fragmented into H and O, NH3 interacts weakly with EGPR2 sample which reveals the enhanced sensing ability of EGPR2. Apparently, it would be more suitable to use EGRP2 in sensing applications due to its sensitivity to NH3 molecules, its stability, and its resistance to H2O molecules in humid ambient.
Citation - WoS: 7
Citation - Scopus: 13
Anticorrosion Coating for Magnesium Alloys: Electrospun Superhydrophobic Polystyrene/Sio2 Composite Fibers
(TUBITAK, 2018) Horzum Polat, Nesrin; Kap, Özlem; Farzaneh, Amir; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
Superhydrophobic nanocomposite coatings for magnesium surfaces with remarkable corrosion resistance were fabricated by electrospinning in the presence of fluorosilane-functionalized silica (SiO2) nanoparticles. The effects of surface-modified silica (mod-SiO2) nanoparticles on the superhydrophobicity and corrosion resistance of polystyrene (PS)/mod-SiO2 fiber coatings were evaluated. The incorporation of the SiO2 nanoparticles endows PS fibers with rough surfaces exhibiting a water contact angle (WCA) of 165◦. The surface wettability, corrosion resistance, and their relation to the inorganic content in the PS fibers and the contact angle of the composite coatings were explored. Analysis of the corrosion results confirmed that the PS/mod-SiO2 coating protected the Mg surface from corrosion. In addition, PS fibers containing mod-SiO2 nanoparticles showed improved hydrophobicity, and excellent corrosion resistance was achieved with PS fibers containing 4 wt% SiO2 nanoparticles.
Citation - WoS: 4
Citation - Scopus: 5
An Anticounterfeiting Technology Combining an Inp Nanoparticle Ink and a Versatile Optical Device for Authentication
(Royal Society of Chemistry, 2021) Taşcıoğlu, Didem; Sevim Ünlütürk, Seçil; Özçelik, Serdar; 04.01. Department of Chemistry; 01. Izmir Institute of Technology; 04. Faculty of Science
Counterfeiting is a growing issue and causes economic losses. Fluorescent inks containing In(Zn)P/ZnS/DDT colloidal nanoparticles are formulated and combined with a convenient optical device for authentication. The particle size and fluorescent colors of the colloidal nanoparticles were tuned by adjusting the reaction temperature. The particle stability and brightness were improved by the addition of dodecanethiol, coating the particle surface with an organic shell. Security patterns were printed on various substrates by applying the screen-printing technique. The patterns were invisible under daylight but observable under UV-light illumination, displaying five different emission colors. By adjusting the concentration of the nanoparticles in the ink, the security patterns were made almost not observable under UV-light illumination but clearly identified by a commercial fiber optics-based spectrometer and a handheld optical device, called a Quantag sensor that was developed in-house. Furthermore, the spectral signatures of barely noticeable patterns are unambiguously validated by the Quantag sensor. Accordingly, low cost and easily applicable anticounterfeiting technology powered by custom-formulated fluorescent inks and a handheld optical instrument are developed to authenticate valuable documents and products.
Citation - WoS: 8
Citation - Scopus: 6
Assessment of Melt Cleanliness of Secondary 5000 Aluminum Alloy Via Non-Metallic Inclusions Characterization
(Springer, 2023) Li, Cong; Dang, Thien; Huang, Jinxian; Huang, Chunfa; Li, Jianguo; Friedrich, Bernd; Gökelma, Mertol; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
The extensive energy consumption of primary aluminum production stimulates increasing need of producing primary-quality alloys with secondary sources, during which process amount of non-metallic inclusions (NMIs) in the alloy must be strictly controlled. In the present study funded by AMAP Open Innovation Research Cluster, NMIs generated during remelting a 5000 Al-Mg alloy was investigated to offer benchmarking characters of NMIs with respect to type, morphology, size, composition, and concentration. Under different remelting conditions NMIs formed in the melt ahead of solidification were concentrated using Porous Disc Filtration Apparatus (PoDFA) and characterized microstructurally and quantitatively. Investigated conditions included heating cycle, organic contaminations, and refractory materials. Results suggested oxide films and cuboid particles as typical oxides with, respectively, different compositions. The amount of formed oxides declined with the increase of heating rate. With respect to aluminum carbide (Al4C3), organic contaminations were confirmed to lead to an increased amount of its formation. The carbon-containing refractory material contributed more significantly than organic contaminations on the formation of Al4C3 at melt temperatures over 760 & DEG;C. Formulas were derived based on trial results to enable translation of NMIs PoDFA value [mm(2)/kg] into their mass fraction [ppm] in the melt.
Citation - Scopus: 1
Assessment of Separation and Agglomerationt Tendency of Non-Metallic Inclusions in an Electromagnetically Stirred Aluminum Melt
(Springer, 2023) Li, Cong; Dang, Thien; Gökelma, Mertol; Zimmermann, Sebastian; Mitterecker, Jonas; Friedrich, Bernd; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
Presence of non-metallic inclusions (NMIs) reduces surface quality and mechanical properties of aluminum products. The development of good NMIs removal practices relies on the understanding of inclusion behaviors with respect to separation and agglomeration particularly in the turbulent flow. In the scenario of electromagnetically induced recirculated turbulent flow, the concerned behaviors of inclusions with different sizes have rarely been investigated experimentally. In the presented study funded by AMAP Open Innovation Research Cluster, reference materials were prepared with uniformly distributed NMIs (SiC and MgAl2O4) via an ultrasound-involved casting route. Reference materials were charged into an aluminum melt where turbulent flow was promoted via electromagnetic force. Microscopical analysis shows non-significant agglomeration tendency of SiC, MgAl2O4, and TiB2 inclusion. Time-weight filtration curve, PoDFA, and Spark Spectrometer results suggest a strong dependence of separation rate on particle size. Analytical models were established to estimate the collision rate of particles and to evaluate separation probability of different sized particles. © 2023, The Minerals, Metals & Materials Society.
Citation - WoS: 20
Citation - Scopus: 21
Atomic–scale Investigations of Passive Film Formation on Ti-Nb Alloys
(Elsevier, 2023) Çaha, İhsan; Alves, Alexandra C.; Chirico, Caterina; Maria Pinto, Ana; Tsipas, Sophia; Gordo, Elena; Bondarchuk, Oleksandr; Leonard Deepak, Francis; Toptan, Fatih; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
This study extensively investigates the passive film formation mechanisms on Ti-xNb alloys by using several electrochemical techniques, including electrochemical impedance spectroscopy (EIS) before and after potentiostatic polarization at the passive zone, and Mott-Schottky (MS) measurements in 9 g/l NaCl electrolyte at 37 °C, together with X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) analysis. Overall, the Ti40Nb presented lower corrosion resistance due to a thinner passive film as compared to commercial pure Ti (grade 2) and Ti12Nb. The passive film formed on Ti12Nb and Ti40Nb alloys at a steady-state condition (+0.5 VAg/AgCl for 60 min) is composed of amorphous phases of TiO, Ti2O3, TiO2, Nb2O5 and crystalline phases of TiO2 (anatase) and Nb2O5. © 2022 Elsevier B.V.
Audio-magnetotelluric (amt) studies over rajapur hot spring in west coast maharashtra, India
(indian Acad Sciences, 2024) Deshmukh, Vasu; Kumar, P. V. Vijaya; Chandrasekaram, D.; Raju, Khasi; Sathishkumar, S.; Srinivas, Y.; Rao, P. B. V. Subba; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
In the west coast geothermal provinces, the Rajapur hot spring, located in the southern part of western Maharashtra, is well thought to originate from the interaction of meteoric water with the granitic basement. A 3D AMT survey was conducted to determine the geo-electrical structure of the hot spring. Dimensionality analysis carried out by phase tensor analysis reveals complex subsurface 3D structures. 2D and 3D modelling have yielded three distinct resistivity layers in the Rajapur geothermal field. These layers include a moderately resistive surface layer representing weathered Deccan traps having a thickness of about 100 m, a conductive second layer with a thickness of about 100-400 m represents Kaladgi sediments and a deeper high resistive layer (0.5-1.0 km) representing granitic gneisses basement. High conductivity anomaly within the Kaladgi sediments represents a hydrothermal reservoir that is associated with faults/fractures beneath the Deccan Traps.
Citation - WoS: 15
Citation - Scopus: 17
Bacterial Detection Using Bacteriophages and Gold Nanorods by Following Time-Dependent Changes in Raman Spectral Signals
(Informa Healthcare, 2018) Moghtader, Farzaneh; Tomak, Aysel; Zareie, Hadi M.; Pişkin, Erhan; 03.01. Department of Bioengineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
This study attemps to develop bacterial detection strategies using bacteriophages and gold nanorods (GNRs) by Raman spectral analysis. Escherichia coli was selected as the target and its specific phage was used as the bioprobe. Target bacteria and phages were propagated/purified by traditional techniques. GNRs were synthesized by using hexadecyltrimethyl ammonium bromide (CTAB) as stabilizer. A two-step detection strategy was applied: Firstly, the target bacteria were interacted with GNRs in suspensions, and then they were dropped onto silica substrates for detection. It was possible to obtain clear surface-enchanced Raman spectroscopy (SERS) peaks of the target bacteria, even without using phages. In the second step, the phage nanoemulsions were droped onto the bacterial-GNRs complexes on those surfaces and time-dependent changes in the Raman spectra were monitored at different time intervals upto 40 min. These results demonstrated that how one can apply phages with plasmonic nanoparticles for detection of pathogenic bacteria very effectively in a quite simple test.
Citation - WoS: 80
Citation - Scopus: 85
Ballistic Thermoelectric Properties of Monolayer Semiconducting Transition Metal Dichalcogenides and Oxides
(American Physical Society, 2019) Özbal, Gözde; Senger, Ramazan Tuğrul; Sevik, Cem; Sevinçli, Haldun; 03.09. Department of Materials Science and Engineering; 04.05. Department of Pyhsics; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of Technology
Combining first-principles calculations with Landauer-Mittiker formalism, ballistic thermoelectric transport properties of semiconducting two-dimensional transition metal dichalcogenides (TMDs) and oxides (TMOs) (namely MX2 with M = Cr, Mo, W, Ti, Zr, Hf; X = O, S, Se, Te) are investigated in their 2H and 1T phases. Having computed structural, as well as ballistic electronic and phononic transport properties for all structures, we report the thermoelectric properties of the semiconducting ones. We find that 2H phases of four of the studied structures have very promising thermoelectric properties, unlike their 1T phases. The maximum room temperature p-type thermoelectric figure of merit (ZT) of 1.57 is obtained for 2H-HfSe2, which can be as high as 3.30 at T = 800 K. Additionally, 2H-ZrSe2, 2H-ZrTe2, and 2H-HfS2 have considerable ZT values (both nand p-type), that are above 1 at room temperature. The 1T phases of Zr and Hf-based oxides possess relatively high power factors, however their high lattice thermal conductance values limit their ZT values to below 1 at room temperature.
Citation - WoS: 27
Citation - Scopus: 31
Ballistic Thermoelectric Transport Properties of Two-Dimensional Group Iii-Vi Monolayers
(American Physical Society, 2021) Çınar, Mustafa Neşet; Özbal Sargın, Gözde; Sevim, Koray; Özdamar, Burak; Kurt, Gizem; Sevinçli, Haldun; 03.09. Department of Materials Science and Engineering; 04.05. Department of Pyhsics; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of Technology
Ballistic transport and thermoelectric properties of group III-VI compounds (XY: X = B, Al, Ga, In, Tl; Y = O, S, Se, Te, Po) are investigated based on first-principles calculations and Landauer formalism. This large family is composed of 25 compounds which stands out with their unique electronic band structures. Mexican hat shaped valence band, which exhibits quartic energy-momentum relation gives rise to a sharp peak in the density of states as well as a steplike electronic transmission spectrum near the valence band edge. The intriguing electronic band structure and transport properties motivate us to explore thermoelectric properties of group III-VI monolayers. We find that, in addition to the stepwise transmission at the band edge, flat bands, valley degeneracy, and band degeneracy are the factors that enhance thermoelectric efficiencies. For heavier compounds, better thermoelectric efficiencies are possible for both n-type and p-type carriers.
Citation - WoS: 8
Citation - Scopus: 10
Behavior of Al4c3 Particles During Flotation and Sedimentation in Aluminum Melts
(Springer, 2021) Gökelma, Mertol; Storm Aarnaes, Trygve; Maier, Juergen; Renkel, Maria F.; Ekstrom, Kai Erik; Friedrich, Bernd; Tranell, Gabriella; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
Al4C3 particles form during the primary production of aluminum via molten salt electrolysis due to the carbon solubility and direct contact between bath, metal, and carbon anodes. Additional Al4C3 may form during melt processing through direct contact between the melt and carbonaceous materials. As a result of their small size and similar density to aluminum, removal of aluminum carbide particles can be challenging. If not removed, carbides can produce inclusion defects or poor surface condition in aluminum products. The current work studies the removal and behavior of Al4C3 particles during flotation with different gas mixtures, as well as sedimentation. The interaction between carbide particles and Al2O3 films during the melt treatment processes was also studied and reported. Factsage thermochemical software was used to model the interactions at the interface of inclusions and bubbles covered by films. The highest degree of carbide removal was obtained after flotation with an H2O-containing argon gas mixture, where the carbide concentration dropped below the measured solubility limit of carbon at the corresponding temperature. Strong interaction between Al4C3 particles and Al2O3 films was observed during sedimentation which worked as an efficient removal method for the particles. Oxidation of carbides and formation of oxycarbides were suggested as the mechanisms promoting the attachment of carbides on oxide films.
Citation - WoS: 66
Citation - Scopus: 66
Bilayers of Janus Wsse: Monitoring the Stacking Type: Via the Vibrational Spectrum
(Royal Society of Chemistry, 2018) Kandemir, Ali; Şahin, Hasan; 04.04. Department of Photonics; 04. Faculty of Science; 01. Izmir Institute of Technology
Motivated by the recent successful synthesis of Janus type single layers of transition metal dichalcogenides, we investigate the stability, vibrational and electronic properties of the Janus single layer structure of WSSe and its bilayers by means of density functional theory. The structural and vibrational analysis show that the Janus single layer of WSSe forms a dynamically stable structure in the 2H phase. Owing to its non-centrosymmetric structure, the Janus WSSe single layer has two in-plane (E) and two out-of-plane (A) Raman active phonon modes. The eigen-frequencies of the prominent Raman active modes are calculated to be 277 (A) and 322 (E) cm-1. Similar to single layer WS2 and WSe2, Janus WSSe is a direct band gap semiconductor that has two electronically different faces. In addition, the possible bilayer stacking orders of the Janus WSSe single layers are investigated. It is found that there are 3 stacking types of bilayer Janus WSSe and each stacking type has distinctive Raman characteristics in its vibrational spectrum. Our results show that thanks to the vibrational characteristics, which stem from the distinctive interlayer interactions at different sides, the stability and stacking types of the bilayer of WSSe Janus structure can be monitored.
Citation - WoS: 1
Citation - Scopus: 1
Bioavailability Assessment of the Novel Gsh-Functionalized Feb Nanoparticles Via Oxidative Stress and Trace Element Metabolism in Vitro: Promising Tools for Biomedical Applications
(Springer, 2024) Aydemir, Duygu; Aribuga, Dilara; Hashemkhani, Mahshid; Acar, Havva Yagci; Çağıran, Özge Balcı; Ulusu, Nuriye Nuray; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
Iron-based magnetic nanoparticles (NPs) have attracted significant attention in biomedical research, particularly for applications such as cancer detection and therapy, targeted drug delivery, magnetic resonance imaging (MRI), and hyperthermia. This study focuses on the synthesis and glutathione (GSH) functionalization of iron boride (FeB) nanoparticles (NPs) for prospective biomedical use. The GSH-functionalized FeB NPs (FeB@GSH) demonstrated ferromagnetic behavior, with a saturation magnetization (Ms) of 45.8 emu/g and low coercivity (Hc = 1000 Oe), indicating desirable magnetic properties for biomedical applications. Transmission electron microscopy (TEM) analysis of the FeB@GSH revealed well-dispersed nanoparticles with diameters smaller than 30 nm. Comprehensive nanotoxicity and biocompatibility assessments were performed using various healthy and cancer cell lines, including 293 T, HeLa, 3T3, MCF7, HCT116, and CFPAC-1. Cytotoxicity assays were conducted on FeB@GSH-treated cells over a dose range of 0-300 mu g/mL during 24-h incubations. Results indicated no significant differences in cell viability between treated and untreated control groups, confirming the biocompatibility of FeB@GSH. Further nanotoxicity evaluations were carried out on 3T3, 293 T, and CFPAC-1 cell lines, focusing on oxidative stress markers and cellular metabolism by measuring antioxidant enzyme activity. Additionally, ion release and mineral metabolism were assessed using inductively coupled plasma mass spectrometry (ICP-MS), revealing no notable variations between the treated and control groups. These findings suggest that FeB@GSH NPs exhibit excellent biocompatibility, making them promising candidates for diverse biomedical applications, including medical imaging, drug delivery systems, and therapeutic interventions.

Browse

Browsing Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği by Language "en"