Please use this identifier to cite or link to this item: https://hdl.handle.net/11147/10398
Full metadata record
DC FieldValueLanguage
dc.contributor.authorÖzçelik, H. Gökberktr
dc.contributor.authorSatıroğlu, Ezgitr
dc.contributor.authorBarışık, Murattr
dc.date.accessioned2021-01-24T18:34:34Z-
dc.date.available2021-01-24T18:34:34Z-
dc.date.issued2020-
dc.identifier.issn2040-3364-
dc.identifier.issn2040-3372-
dc.identifier.urihttps://doi.org/10.1039/d0nr05392a-
dc.identifier.urihttps://hdl.handle.net/10398-
dc.description.abstractWetting behavior on a heterogeneous surface undergoes contact angle hysteresis as the droplet stabilized at a metastable state with a contact angle significantly different from its equilibrium value due to contact line pinning. However, there is a lack of consensus on how to calculate the influence of pinning forces. In general, the pinning effect can be characterized as (i) microscopic behavior when a droplet is pinned and the contact angle increases/decreases as the droplet volume increases/decreases and (ii) macroscopic behavior as the pinning effects decrease and ultimately, disappear with the increase of the droplet size. The current work studied both behaviors using molecular dynamics (MD) simulation with more than 300 different size water droplets on silica surfaces with three different patterns across two different wetting conditions. Results showed that the contact angle increases linearly with increasing droplet volume through the microscopic behavior, while the droplet is pinned on top of a certain number of patterns. When we normalized the droplet size with the corresponding pattern size, we observed a "wetting similarity" that linear microscopic contact angle variations over different size heterogeneities continuously line up. This shows that the pinning force remains constant and the resulting pinning effects are scalable by the size ratio between the droplet and pattern, independent of the size-scale. The slope of these microscopic linear variations decreases with an increase in the droplet size as observed through the macroscopic behavior. We further found a universal behavior in the variation of the corresponding pinning forces, independent of the wetting condition. In macroscopic behavior, pinning effects become negligible and the contact angle reaches the equilibrium value of the corresponding surface when the diameter of the free-standing droplet is approximately equal to 24 times the size of the surface structure. We found that the pinning effect is scalable with the droplet volume, not the size of the droplet base.en_US
dc.description.sponsorshipThis work was supported by the Scientific and Technological Research Council of Turkey (TUBTAK) under the Grant Number 217M460. The authors would like to thank the Center for Scientific Computation at Southern Methodist University. Dr Barisik also acknowledges the support from the Turkish Academy of Sciences (TUBA) in the framework of the Young Scientist Award Programme (GEBIP).en_US
dc.language.isoenen_US
dc.publisherRoyal Society of Chemistryen_US
dc.relation.ispartofNanoscaleen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleSize dependent influence of contact line pinning on wetting of nano-textured/patterned silica surfacesen_US
dc.typeArticleen_US
dc.institutionauthorÖzçelik, H. Gökberktr
dc.institutionauthorSatıroğlu, Ezgitr
dc.institutionauthorBarışık, Murattr
dc.departmentİzmir Institute of Technology. Energy Systems Engineeringen_US
dc.departmentİzmir Institute of Technology. Mechanical Engineeringen_US
dc.identifier.volume12en_US
dc.identifier.issue41en_US
dc.identifier.startpage21376en_US
dc.identifier.endpage21391en_US
dc.identifier.wosWOS:000584907600029en_US
dc.identifier.scopus2-s2.0-85094983814en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı-
dc.identifier.doi10.1039/d0nr05392a-
dc.identifier.pmid33078810en_US
dc.relation.doi10.1039/d0nr05392aen_US
dc.coverage.doi10.1039/d0nr05392aen_US
dc.identifier.wosqualityQ1-
dc.identifier.scopusqualityQ1-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.cerifentitytypePublications-
item.fulltextWith Fulltext-
item.languageiso639-1en-
item.grantfulltextopen-
item.openairetypeArticle-
crisitem.author.dept03.10. Department of Mechanical Engineering-
Appears in Collections:Energy Systems Engineering / Enerji Sistemleri Mühendisliği
Mechanical Engineering / Makina Mühendisliği
PubMed İndeksli Yayınlar Koleksiyonu / PubMed Indexed Publications Collection
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Files in This Item:
File SizeFormat 
d0nr05392a.pdf10.07 MBAdobe PDFView/Open
Show simple item record



CORE Recommender

SCOPUSTM   
Citations

12
checked on Apr 5, 2024

WEB OF SCIENCETM
Citations

10
checked on Mar 30, 2024

Page view(s)

140
checked on Apr 15, 2024

Download(s)

72
checked on Apr 15, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.