Please use this identifier to cite or link to this item:
Title: Determination of the particle interactions, rheology and the surface roughness relationship for dental restorative ceramics
Authors: Kes, Mürşide
Polat, Hürriyet
Keleşoğlu, Serkan
Polat, Mehmet
Aksoy, Gökhan
Keywords: Ceramic
Dental ceramics
Inter-particle interactions
Surface properties
Publisher: Elsevier Ltd.
Source: Kes, M., Polat, H., Keleşoğlu, S., Polat, M., and Aksoy, G. (2009). Determination of the particle interactions, rheology and the surface roughness relationship for dental restorative ceramics. Journal of the European Ceramic Society, 29(14), 2959-2967. doi:10.1016/j.jeurceramsoc.2009.04.015
Abstract: The effect of inter-particle interactions on the slurry properties and the final surface roughness of the dental ceramic restoratives was investigated. A commercial dental ceramic powder, IPS Empress 2 veneer, was used as the raw material. The magnitudes of the particle-particle interactions were computed by the DLVO theory for the ceramic slurries of different electrolyte solutions (0.1 M, 0.25 M, 0.5 M, 0.75 M, 1 M NaCl and CaCl2). As expected, the energies of particle-particle interactions were influenced significantly by the presence of electrolytes. These computations demonstrated that addition of electrolytes leads to a progressive depression of the repulsive double layer forces. The absence of these forces should inevitably lead to agglomeration caused by the ever-present van der Waals forces. The rheological measurements carried out using the slurries with same solution properties supported the findings of the DLVO computations. It was found that dental ceramic slurries showed a Newtonian behavior in the absence of electrolytes, which is indicative of little or no agglomeration in the slurry. On the other hand, the same slurries displayed a non-Newtonian, shear thinning behavior in the presence of electrolytes which can be attributed to agglomeration or gelation. Roughness of the ceramic surfaces produced from these slurries was studied by SEM analysis and profilometer measurements. Contact angle studies were also carried out on the same surfaces. It was observed that the surface became rougher initially with electrolyte addition to a maximum, most probably due to formation of isolated agglomerates due to a reduction of the repulsive double layer forces. After reaching a maximum, surface roughness decreased to a much lower value with further increase in electrolyte concentration. This was most probably caused by the formation of a relatively homogeneous, gel-like structure within the extensively agglomerated slurry due to a complete collapse of the double layer.
ISSN: 0955-2219
Appears in Collections:Chemical Engineering / Kimya Mühendisliği
Chemistry / Kimya
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Files in This Item:
File Description SizeFormat 
2320.pdfMakale1.36 MBAdobe PDFThumbnail
Show full item record

CORE Recommender


checked on Jul 19, 2024


checked on Jul 19, 2024

Page view(s)

checked on Jul 22, 2024


checked on Jul 22, 2024

Google ScholarTM



Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.