Please use this identifier to cite or link to this item: https://hdl.handle.net/11147/2845
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorÖzdemir, Ekremen_US
dc.contributor.authorKahyaoğlu, Tuğçe Nefise-
dc.date.accessioned2017-01-24T13:42:06Z
dc.date.available2017-01-24T13:42:06Z
dc.date.issued2016-08
dc.identifier.citationKahyaoğlu, T. N. (2016). Synthesis of needle-like and rod-like nano BaCO3 particles. Unpublished master's thesis, Izmir Institute of Technology, Izmir, Turkeyen_US
dc.identifier.urihttp://hdl.handle.net/11147/2845
dc.descriptionThesis (Master)--Izmir Institute of Technology, Chemical Engineering, Izmir, 2016en_US
dc.descriptionIncludes bibliographical references (leaves: 80-82)en_US
dc.descriptionText in English; Abstract: Turkish and Englishen_US
dc.descriptionxiii, 82 leavesen_US
dc.description.abstractBarium carbonate (BaCO3) has been widely used in soft and heavy industries such as ferrite magnets, solid oxide fuel cells, optical glass manufacturing, coatings, and polymeric composite materials as well as ceramic and brick industries. Using BaCO3 in nano sizes will improve some of the physical properties of materials such as tensile strength, opacity, and thermal resistance. Production of BaCO3 by chemical method requires extensive crystallization times and higher temperatures. Production of BaCO3 by carbonation method usually yields particles with some agglomeration. In a study, conducted by our group funded by The Scientific and Technological Research Council (TUBITAK), a method was developed to synthesize hollow nano Calcium Carbonate (CaCO3) particles. It was aimed to apply the developed method, which is unique in its kind, to produce nano BaCO3 particles in different morphologies. Parameters such as effect of barium hydroxide (Ba(OH)2) concentration, CO2 flow rate, length in reaction chamber, and stirring rate were studied. Conductivity and pH values of the solution were monitored during crystallization. Surface morphology and crystal structure of the produced BaCO3 particles were characterized by Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD), respectively. It was shown that rod-like BaCO3 particles produced in nano sizes with almost homogeneous size distributions. The rod-like BaCO3 particles had a diameter from 100 to 400 nm and an aspect ratio of about from 3 to 10. The produced rod-like nano BaCO3 were all in orthorhombic phase of BaCO3 called as Witherite.en_US
dc.description.abstractBaryum karbonat (BaCO3), ferrit mıknatıs yapımı, katı oksit yakıt hücresi yapımı, kaplama ve optik cam sanayi, polimerik kompozit malzemeler ve aynı zamanda seramik ve tuğla gibi birçok hafif ve ağır sanayide kullanılmaktadır. Kimyasal metot ile üretilen BaCO3 da uzun kristalizasyon zamanlarına ve yüksek sıcaklıklara ihtiyaç vardır. Karbonizasyon metodu ile üretilen BaCO3 tanecikleri genellikle topaklaşma problemi ile sonuçlanmaktadır. Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (TÜBİTAK) tarafından desteklenen ve araştırma grubumuz tarafından gerçekleştirilen bir çalışmada içleri boş nano kalsiyum karbonat (CaCO3) taneciklerinin üretimleri başarılmıştır. Alanında tek olarak geliştirilen bu yöntemi kullanarak farklı morfolojilerde nano BaCO3 tanecikleri üretilmesi amaçlanmıştır. Baryum hidroksit (Ba(OH)2) konsantrasyonu, CO2 akış hızı, reaksiyon bölmesi içindeki uzunluk ve karıştırma hızı gibi parametreler çalışılmıştır. Kristalizasyon esnasında çözeltinin iletkenlik ve pH değerleri monitör edilmiştir. Üretilen BaCO3 taneciklerinin yüzey morfolojisi ve kristal yapısı sırasıyla Taramalı Elektron Mikroskobu (SEM) ve X-ışını Saçılımı (XRD) yöntemleriyle karakterize edilmiştir. Nano boyutlarda ve hemen hemen homojen boyut dağılımında çubuk şeklinde BaCO3 taneciklerinin üretildiği gösterilmiştir. Çubuk şekilli nano BaCO3 tanecikleri 100 nm ile 400 nm çaplarda ve 3 ile 10 çap uzunluğu başına boy uzunluğundadırlar. Üretilen çubuk şekilli BaCO3 tanecikleri, viterit olarak adlandırılan, ortorombik fazdadır.en_US
dc.language.isoenen_US
dc.publisherIzmir Institute of Technologyen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectBarium carbonateen_US
dc.subjectWitheriteen_US
dc.subjectBarium carbonate particlesen_US
dc.subjectSynthesis (Chemistry)en_US
dc.subjectScanning electron microscopyen_US
dc.subjectCrystallizationen_US
dc.subjectX-ray diffractionen_US
dc.titleSynthesis of needle-like and rod-like nano BaCO3 particlesen_US
dc.title.alternativeİğne-şekilli ve çubuk-şekilli nano BaCO3 taneciklerinin sentezlenmesien_US
dc.typeMaster Thesisen_US
dc.institutionauthorKahyaoğlu, Tuğçe Nefise-
dc.departmentThesis (Master)--İzmir Institute of Technology, Chemical Engineeringen_US
dc.relation.publicationcategoryTezen_US
item.openairetypeMaster Thesis-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.fulltextWith Fulltext-
item.languageiso639-1en-
item.cerifentitytypePublications-
item.grantfulltextopen-
Appears in Collections:Master Degree / Yüksek Lisans Tezleri
Files in This Item:
File Description SizeFormat 
T001479.pdfMasterThesis5.58 MBAdobe PDFThumbnail
View/Open
Show simple item record



CORE Recommender

Page view(s)

104
checked on Mar 25, 2024

Download(s)

66
checked on Mar 25, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.