Please use this identifier to cite or link to this item: https://hdl.handle.net/11147/4315
Title: Modification of chemical and morphological properties of lead-acid battery negative active material
Other Titles: Kurşun asit akü negatif aktif malzemesinin kimyasal ve morfolojik özelliklerinin modifikasyonu
Authors: Polat, Mehmet
Kama, Burak Muhammet
Keywords: Lead-acid batteries
Issue Date: 2014
Publisher: Izmir Institute of Technology
Source: Kama, B. M. (2014). Modification of chemical and morphological properties of lead-acid battery negative active material. Unpublished master's thesis, Izmir Institute of Technology, Izmir, Turkey
Abstract: Lead-acid batteries which are indispensable equipment for motor vehicles are one of the most important electrochemical processes commercially thanks to their advantages, such as low cost and capability of providing high energy. The new generation cars which such as climates, smart screens, stronger engines etc., require the batteries which should have longer cycle life and higher cold-cranking ampere. In this study, the aims were elucidating the exact working mechanism of lead-acid battery negative active material and improving the commercial lead-acid battery for micro-hybrid vehicles. For this purpose, experimental studies were separated to three parts. First one is the characterizing of negative electrode raw materials, leady oxide, lignosulfonate, carbon, barium sulfate. Second one is determination of rheological properties of negative paste in different cases. Third one is the preparation of pastes and then performance testes (reserve capacity, cold-cranking ampere and cycle life) of negative plates prepared from the pastes characterized in second part. As a result of first part of studies, it was shown that the all of carbon materials and leady oxide suffer from agglomeration in lignosulfonate solutions prepared in different concentrations. In second part, the rheological properties of negative paste were determined in different preparation cases and shown that the amount of additives and preparation method has big effects. Finally, the negative plates were prepared with two methods, wet and dry mixing. After that the plates were formed and then electrical tests were performed. Consequently, a battery which has better properties, physically and chemically, was obtained. However, this improvement was not enough due to the dispersion problems of carbon samples tested in this study.
Description: Thesis (Master)--Izmir Institute of Technology, Chemical Engineering, Izmir, 2014
Full text release delayed at author's request until 2018.01.15
Includes bibliographical references (leaves: 72-76)
Text in English; Abstract: Turkish and English
xi, 76 leaves
URI: http://hdl.handle.net/11147/4315
Appears in Collections:Master Degree / Yüksek Lisans Tezleri

Files in This Item:
File Description SizeFormat 
T001321.pdfMasterThesis4.91 MBAdobe PDFThumbnail
View/Open
Show full item record

CORE Recommender

Page view(s)

100
checked on Jan 30, 2023

Download(s)

310
checked on Jan 30, 2023

Google ScholarTM

Check


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.