Please use this identifier to cite or link to this item: https://hdl.handle.net/11147/6593
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorYüksel Özşen, Aslıen_US
dc.contributor.authorAkın, Okan-
dc.date.accessioned2017-12-18T09:00:06Z-
dc.date.available2017-12-18T09:00:06Z-
dc.date.issued2017-07-
dc.identifier.citationAkın, O. (2017). Development of a novel hybrid process for the conversion of cellulose into high-value chemicals by applying voltage in hot compressed water. Unpublished doctoral dissertation, Izmir Institute of Technology, Izmir, Turkeyen_US
dc.identifier.urihttp://hdl.handle.net/11147/6593-
dc.descriptionThesis (Doctoral)--Izmir Institute of Technology, Chemical Engineering, Izmir, 2017en_US
dc.descriptionFull text release delayed at author's request until 2020.08.21en_US
dc.descriptionIncludes bibliographical references (leaves: 85-92)en_US
dc.descriptionText in English; Abstract: Turkish and Englishen_US
dc.description.abstractIn this study, a novel hybrid method of hydrothermal electrolysis implemented for the decomposition of microcrystalline cellulose (MCC) into high value added chemicals such as levulinic acid, 5-hydroxymethylfurfural (5-HMF), and furfural. The hypothesis of the study was that, when direct current (DC) is applied the formation of ionic and radical species can alter the hydrolysis of cellulose. Based on this hypothesis, the purpose of the study was to build an integrated method of hydrothermal electrolysis that can lower energy requirement of cellulose hydrolysis by altering the selectivity. In order to investigate the individual and coupled effect of operating parameters such as reaction temperature (170-200 ℃), time (30-120 min.), electrolyte concentration (1-50 mM H2SO4), constant current (0-2 A), statistical analysis was conducted by a fractional factorial design. Analysis of variance (ANOVA) test was applied to the main hydrolysis products yields of MCC, total organic carbon (TOC) and cellulose conversion. Based on the response surface plots, 1A of current at 200 ºC maximized TOC yield and cellulose conversions to 62% and 81%, respectively. In order to enhance the selectivity, constant voltage (2.5, 4.0 and 8.0 V) was applied at 200℃. Application of 2.5 V increased TOC (54%) and alter the selectivity of 5-HMF (30%) and levulinic acid (21%). The structural changes in solid residues were analyzed by Fourier Transform Infrared Spectroscopy (FTIR) and found that MCC particles functionalized by carboxylic acid and sulfonated groups by application of 2.5 V. Therefore, change in the selectivity values were conducted with the functionalization of MCC particles due to applied voltage under sub-critical conditions.en_US
dc.description.abstractBu çalışmada, yeni bir hibrid yöntem olan hidrotermal elektroliz, mikrokristal selülozun (MCC) degerli kimyasallara (levulinik asit, 5-hidroksimetilfurfural (5-HMF), furfural) dönüştürülmesi çalışıldı. Çalışmanın hipotezi, hidrotermal koşullar altında reaksiyon ortamına uygulanan doğru akımın iyonik ve radikal ürünlerin oluşmasına ortam hazırlaması, selülozun hidroliz mekanismasını değiştirebilir. Bu hipoteze dayanarak, çalışmanın amacı, hidrotermal koşullar altında, yüksek katma degerli kimyasallara karşı seçiciliği arttırarak, selüloz hidrolizinin enerji ihtiyacını azaltabilen entegre bir elektroliz yöntemi geliştirmektir. Reaksiyon paramatrelerinin, sıcaklık (170-200 ℃), reaksiyon zamanı (30-120 dk.), uygulanan doğru akım (0-2 A), elektrolit konsantrasyonun (1-50 mM H2SO4), ürünler üzerindeki etkilerini incelemek amacıyla, ½ kesirli çok etkenli deney tasarımı yapıldı. Deneyler sonucu elde edilen, ürün verimleri, toplam organik karbon miktarı, selüloz dönüşümü, varyans analizi (ANOVA) ile istatiksel olarak değerlendirildi. Yanıt yüzeyi yöntemi ile elde edilen verilerde, 200 ℃ sıcaklıkta 1 A sabit doğru akımın uygulanması toplam organik karbon verimini %62’ve selüloz dönüşümünü %81’e yükseltti. Değerli kimyasalların oluşumunda, seçiciliği arttırmak amacıyla, sabit voltaj (2.5, 4.0 ve 8.0 V) deneyleri 200 ℃ sıcaklıkta uygulandı. En çarpıcı sonuçlar, 2.5 V sabit voltaj uygulandığında elde edildi. Toplam organik karbon (%54) ve seçicilikte 5-HMF (%30), levülinik asit (%21) değerlerine ulaşıldı. Reaksiyon sonucu elde edilen katının, FTIR analizi sonucunda karboksilik asit ve sülfon fonksiyonel gruplarının, 2.5 V sabit voltaj değerinde daha belirgin hale geldiği gözlemlendi. Seçicilikteki artışların sebebi olarak bu fonksiyonel gruplarının oluşmasına bağlandı.en_US
dc.format.extentxiii, 101 leavesen_US
dc.language.isoenen_US
dc.publisherIzmir Institute of Technologyen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectSupercritical fluiden_US
dc.subjectMicrobial biomassen_US
dc.subjectHMFen_US
dc.subjectLevulinic aciden_US
dc.titleDevelopment of a novel hybrid process for the conversion of cellulose into high-value chemicals by applying voltage in hot compressed wateren_US
dc.title.alternativeSıcak basınçlı suda voltaj uygulayarak selülozun değerli kimyasallara dönüştürülmesi için yeni bir hibrit süreç geliştirilmesien_US
dc.typeDoctoral Thesisen_US
dc.institutionauthorAkın, Okan-
dc.departmentThesis (Doctoral)--İzmir Institute of Technology, Chemical Engineeringen_US
dc.request.emailokanakin0@gmail.com-
dc.request.fullnameOkan Akın-
dc.relation.publicationcategoryTezen_US
item.openairetypeDoctoral Thesis-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.fulltextWith Fulltext-
item.languageiso639-1en-
item.cerifentitytypePublications-
item.grantfulltextopen-
Appears in Collections:Phd Degree / Doktora
Files in This Item:
File Description SizeFormat 
T001671.pdfDoctoralThesis14.08 MBAdobe PDFThumbnail
View/Open
Show simple item record



CORE Recommender

Page view(s)

134
checked on Mar 25, 2024

Download(s)

62
checked on Mar 25, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.