Please use this identifier to cite or link to this item: https://hdl.handle.net/11147/9669
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorDönmez, Cemalettin-
dc.contributor.authorSönmez, Egemen-
dc.date.accessioned2020-10-09T11:44:52Z-
dc.date.available2020-10-09T11:44:52Z-
dc.date.issued2020-06en_US
dc.identifier.citationSönmez, E. (2020). Manipulation of structural design parameters to mitigate the concentrarion of interstory drift ratios. Unpublished doctoral dissertation, Izmir Institute of Technology, Izmir, Turkeyen_US
dc.identifier.urihttps://hdl.handle.net/11147/9669-
dc.descriptionIncludes bibliographical references (leaves. 231-236).en_US
dc.descriptionThesis (Doctoral)--Izmir Institute of Technology, Civil Engineering, Izmir, 2020-
dc.descriptionText in English; Abstract: Turkish and English-
dc.description.abstractAlthough the interstory drift ratio is used as a limiting factor for specific performance levels by the structural engineering profession, its distribution among the stories is generally disregarded. Observations and analytical studies have shown that even the structures are designed to conform seismic design codes, interstory drifts tend to concentrate at certain regions of the frame structures. In other words, the seismic demand the earthquake imposes is attempted to be provided from a limited part of the structure. As a result, the damage concentrates, and the stiffness of the corresponding stories decreases significantly. Locally, the story drifts become larger. Soft-story mechanisms and abrupt failures may occur under such conditions. In this study, a seismic design method was developed to control the distribution of interstory drifts in a frame structure during the nonlinear seismic response. This method is based on two observations: (i) in the inelastic range, the drift distribution is highly dependent on the yield strengths of the members; (ii) there is a strong correlation between the interstory drift distribution and the plastic rotation distribution at member-ends. Thus, an iterative design procedure is developed to control the distribution of the interstory drifts by adjusting the member yield strengths. Plastic rotations are used as a tool for estimating the required yield strengths. The efficiency of the proposed method was tested using nonlinear time-history analyses. The results demonstrated that the frames designed using the proposed method had well-distributed interstory drift and story damage patterns compared to those of the conventionally designed frames. Furthermore, the overall damage of frames was reduced remarkably.en_US
dc.description.abstractDeprem tasarımında göreli kat öteleme oranı, belirli performans seviyeleri için sınır değer olarak kullanılmasına rağmen, ötelenme oranlarının yapı yüksekliği boyunca gösterdikleri dağılım genellikle göz ardı edilmektedir. Yapılan gözlemler ve analitik çalışmalar, yapıların güncel yönetmeliklere göre tasarlanması durumunda dahi katarası ötelenmelerin yapıların belirli bölgelerinde yoğunlaştıklarını göstermektedir. Diğer bir deyişle deprem talebi, yapının sınırlı bir bölgesi tarafından karşılanmak zorunda kalmakta ve yerel olarak yüksek hasarlar gözlenmektedir. Bu şartlar altında yumuşak kat mekanizmaları ve ani göçmelerin oluşması ihtimali yüksektir. Bu çalışmada doğrusal olmayan deprem davranışı sırasında gerçekleşen katarası ötelenmeleri kontrol etmek amacıyla bir deprem tasarımı yöntemi geliştirilmiştir. Bu yöntem iki gözleme dayanmaktadır: (i) Doğrusal olmayan deprem davranışı sırasındaki ötelenme dağılımı, büyük oranda elemanların akma dayanımlarına bağlıdır; (ii) eleman uçlarındaki plastik dönmelerin dağılımı ile katarası ötelenme dağılımları arasında güçlü bir ilişki vardır. Bu gözlemlere dayanarak, elemanların akma dayanımlarını kurgulamak üzerine kurulu katarası ötelenme dağılımlarını kontrol edecek iteratif bir yöntem geliştirilmiştir. Bu yöntemde, gerekli akma dayanımlarını belirlemek amacıyla plastik dönmeler birer araç olarak kullanılmaktadır. Geliştirilen yöntemin başarısı, doğrusal olmayan dinamik analizler aracılığıyla sınanmıştır. Sonuçlar, önerilen yöntemle tasarlanan çerçevelerin katarası ötelenme ve hasarlarının, geleneksel yöntemlere uygun olarak tasarlanan çerçevelerinkilere oranla çok daha düzgün dağıldığını göstermiştir. Ayrıca, yapı genel hasarı da belirgin ölçüde düşük gerçekleşmiştir.en_US
dc.format.extentXXI, 239 leaves-
dc.language.isoenen_US
dc.publisherIzmir Institute of Technologyen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectEarthquake resistant designen_US
dc.subjectEarthquake engineeringen_US
dc.subjectSeismic designen_US
dc.subjectStructural designen_US
dc.subjectStructural design for dynamic loadsen_US
dc.titleManipulation of structural design parameters to mitigate the concentrarion of interstory drift ratiosen_US
dc.title.alternativeGöreli kat ötelemesi yoğunlaşmalarının yönlendirilmiş yapısal tasarım ile azaltılmasıen_US
dc.typeDoctoral Thesisen_US
dc.institutionauthorSönmez, Egemen-
dc.departmentThesis (Doctoral)--İzmir Institute of Technology, Civil Engineeringen_US
dc.relation.publicationcategoryTezen_US
item.openairetypeDoctoral Thesis-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.fulltextWith Fulltext-
item.languageiso639-1en-
item.cerifentitytypePublications-
item.grantfulltextopen-
Appears in Collections:Phd Degree / Doktora
Files in This Item:
File Description SizeFormat 
9669.pdfTez Dosyası5.05 MBAdobe PDFThumbnail
View/Open
Show simple item record



CORE Recommender

Page view(s)

230
checked on Mar 25, 2024

Download(s)

240
checked on Mar 25, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.