| Issue Date | Title | Author(s) |
| 1 | 2023 | Analysis of adhesively bonded joints of laser surface treated composite primary components of aircraft structures | Nuhoğlu, Kaan; Aktaş, Engin ; Tanoğlu, Metin ; Martin, Seçkin; İplikçi, Hande; Barışık, Murat ; Yeke, Melisa; Türkdoğan, Ceren; Esenoğlu, Gözde ; Dehneliler, Serkan |
| 2 | 2023 | Analysis of the logistic growth model with Taylor Matrix and collocation method | Çelik, Elçin ; Uçar, Deniz |
| 3 | Apr-2023 | Assessment of future water demand in a semiarid region of Turkey: a case study of Tahtali–Seferihisar Basin | Karahan, S. M. ; Elçi, Şebnem |
| 4 | Apr-2023 | Authentication of pomegranate juice in binary and ternary mixtures with spectroscopic methods | Aykaç, Başak; Çavdaroğlu, Çağrı ; Özen, Banu |
| 5 | Feb-2023 | CVD deposited epoxy copolymers as protective coatings for optical surfaces | Karabıyık, Merve; Cihanoğlu, Gizem ; Ebil, Özgenç |
| 6 | Jan-2023 | Destratification of thermally stratified water columns by air diffusers | Elçi, Şebnem ; Hazar, Oğuz; Bahadıroğlu, Nisa ; Karakaya, Derya; Bor, Aslı |
| 7 | Feb-2023 | Development of textured lead-free NBT-based piezoelectric materials in a matrix, synthesized by an alternative route, via templated grain growth | Çoban Tetik, Hatice Şule; Suvacı, Ender; Avcı, A. Murat; Adem, Umut ; Karakaya, Merve |
| 8 | 2023 | Effect of drainage conditions on CPT resistance of silty sand: physical model and field tests | Ecemis, Nurhan ; Arık, Mustafa Sezer ; Taneri, Hazal |
| 9 | 2023 | The effect of geometrical characteristics of TiO2 nanotube arrays on the photocatalytic degradation of organic pollutants | Kartal, Uğur ; Uzunbayır, Begüm; Doluel, Eyyüp Can; Yurddaşkal, Metin; Erol, Mustafa |
| 10 | 2023 | The effect of strain rate on the compression behavior of additively manufactured short carbon fiber-reinforced polyamide composites with different layer heights, infill patterns, and built angles | Zeybek, Mehmet Kaan ; Güden, Mustafa ; Taşdemirci, Alper |
| 11 | 2023 | Effects of different precursors on the aging and electrocaloric properties of Mn-doped Ba0.95Sr0.05TiO3 ceramics | Karakaya, Merve ; Erdem, Emre; Akdoğan, Yaşar ; Adem, Umut |
| 12 | Aug-2023 | Effects of nanosecond laser ablation parameters on surface modification of carbon fiber reinforced polymer composites | İplikçi, Hande; Barışık, Murat ; Türkdoğan, Ceren; Martin, Seçkin; Yeke, Melisa; Nuhoğlu, Kaan; Esenoğlu, Gözde ; Tanoğlu, Metin ; Aktaş, Engin ; Dehneliler, Serkan; İriş, Mehmet Erdem |
| 13 | 2023 | Enhancing thickness determination of nanoscale dielectric films in phase diffraction-based optical characterization systems with radial basis function neural networks | Ataç, Enes; Karatay, Anıl ; Dinleyici, Mehmet Salih |
| 14 | Feb-2023 | Experimental investigation of air cooling with/out tab cooling in cell and module levels for thermal uniformity in battery packs | Göçmen, Sinan ; Çetkin, Erdal |
| 15 | 2023 | Exposure to fumes of a vegetable margarine for frying: Respiratory effects in an experimental model | Cimrin, Arif H.; Alpaydin, Aylin Ozgen; Ozbal, Seda; Toprak, Melis ; Yılmaz, Osman; Uluorman, Funda; Ergur, Bekir Uğur; Gürel, Duygu; Sofuoğlu, Sait Cemil |
| 16 | Jan-2023 | Fabrication and development of a microfluidic paper-based immunosorbent assay platform (μPISA) for colorimetric detection of hepatitis C | Özefe, Fatih ; Arslan Yıldız, Ahu |
| 17 | 2023 | Formation of monolithic SrTiO3-TiO2 ceramic heterostructures by reactive hydrothermal sintering | Karacasulu, Levent ; Kartal, Uğur ; İçin, Öykü; Bortolotti, Mauro; Biesuz, Mattia; Ahmetoğlu, Çekdar Vakıf |
| 18 | 2023 | An improved passive tuned mass damper assisted by dual stiffness | Roozbahan, Mostafa ; Turan, Gürsoy |
| 19 | 2023 | Investigating the effects of PA66 electrospun nanofibers layered within an adhesive composite joint fabricated under autoclave curing | Esenoğlu, Gözde ; Tanoğlu, Metin ; Barışık, Murat ; İplikçi, Hande; Yeke, Melisa; Nuhoğlu, Kaan; Türkdoğan, Ceren; Martin, Seçkin; Aktaş, Engin ; Dehneliler, Serkan; Gürbüz, Ahmet Ayberk; İriş, Mehmet Erdem |
| 20 | 2023 | Investigation and validation of the flow stress equation and damage model parameters of an electron beam melted Ti6Al4V alloy with a martensitic phase | Güden, Mustafa ; Bin Riaz, Arslan; Toksoy, Ahmet Kaan; Yıldıztekin, Murat; Erten, Hacer İrem; Çimen, Gülden; Hızlı, Burak |
