Please use this identifier to cite or link to this item: https://hdl.handle.net/11147/4345
Title: Kauçuk/metal yapışma mukavemetinin belirlenmesi
Other Titles: Determination of rubber adhesive strength on metals
Authors: Durmuş, Ali
Ülkü, Sedat
Güden, Mustafa
Otnar, Ö. Faruk
Keywords: EPDM
Yapışma dayanımı
Yüzey pürüzlülüğü
Bası testi
Adhesive strength
Surface roughness
Compression test
Publisher: Uludağ Üniversitesi
Source: Durmuş, A., Ülkü, S., Güden, M. & Otnar, Ö. F. (2005). Kauçuk/Metal yapışma mukavemetinin belirlenmesi. Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 10 (1), 33-39.
Abstract: EPDM (ethylene-propylene-diene terpolymer) kauçuğunun metale yapışma mukavemetine, metal yüzey pürüzlülüğünün ve kullanılan yapıştırıcı cinsinin etkisi araştırılmıştır. Farklı dolgu oranlarında üretilen 5 tip EPDM kauçuğunun bası, sertlik ve yoğunluk testleri yapılarak metale yapıştırılacak kauçuk belirlenmiştir. Belirli sürelerde kumlanarak yüzey pürüzlülükleri değiştirilen metal numuneler çeşitli yapıştırıcılarla kauçuğa yapıştırılmış ve yapışma mukavemetleri tespit edilmiştir. Yüzey pürüzlülük değerlerinin yaklaşık sabit kaldığı 6 dakika ve üzerindeki kumlama sürelerinde elde edilen metal yüzeylerin kauçuklara vulkanizasyon işlemi sırasında Chemosil yapıştırıcı ile yapıştırılmasının uygun olacağı görülmüştür. Vulkanizsayon işlemi sonrası yapıştırmada ise en iyi sonuçlar, 3 dak. kumlanmış yüzey ve Loctite 480 yapıştırıcı için elde edilmiştir.
The investigation of EPDM has been completed including the strength determination of the bond between EPDM and the metal specimen, its behavior against the roughness of metal surfaces and the interaction with different types of adhesives. Five different EPDM (having different filling rates), have been subjected to the following measurements; compression, hardness and density. The results of these measurements revealed the most appropriate EPDM. The surface roughness of various metal specimens, which were sandblasted within specific time periods, were interacted with EPDM using various type of adhesives in order to reveal the EPDM strength against metal specimen. It was concluded that the adhesive namely known as Chemosil was found to be the most appropriate for the metal specimens, which had been formed in sandblasting during vulcanization, as such adhesive provided a constant roughness on pre-defined metal specimens during 6 minutes. It was observed that after vulcanization of the sandblasted metal surface over a period of 3 minutes, using the adhesive, Loctite 480, provided the best results.
URI: http://hdl.handle.net/11147/4345
ISSN: 2148-4147
2148-4155
Appears in Collections:Mechanical Engineering / Makina Mühendisliği

Files in This Item:
File Description SizeFormat 
4345.pdfMakale247.5 kBAdobe PDFThumbnail
View/Open
Show full item record



CORE Recommender

Page view(s)

402
checked on Mar 25, 2024

Download(s)

114
checked on Mar 25, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.