Showing results 1 to 100 of 255
next >
Issue Date | Title | Author(s) |
2004 | Air leakage detection in various cross sectioned air ducts and research on manufacturing methods for airtightness | Aydın, Çiğdem |
Jul-2019 | Airfoil boundary-layer stability calculations and transition prediction | Pekdüz, Umut |
Jan-2019 | Analysis and modeling of an actuation system to be used in light-weight collaborative robots | Yılmaz, Mert |
Jun-2023 | Analysis of adhesively bonded composite aerospace structures developed by laser surface treatment | Nuhoğlu, Kaan |
Dec-2017 | Analysis of electromechanical behavior of piezoelectric smart curved beams | Aras, Tunç |
2009 | Analysis of the carcked infinite hollow cylinder with loading on crack surfaces | Avcı, Fatih |
2014 | Analytical and numerical sensitivity analysis of constant temperature hot-wire anemometre | Uz, Yusuf Can |
2005 | "ANN" artifical neural networks and fuzzy logic models for cooling load prediction | Bozokalfa, Gökhan |
2005 | The application of aliminum foam for the heat and noise reduction in automobiles | Akseli, Ilgaz |
Jul-2019 | Augmented reality-based model-mediated teleoperation: A mobile telerobot case study | Kirişci, Nihat Çağhan |
2006 | Autonomous solid waste separation system design | Pekdur, Ömer |
2006 | Biokinematic analysis of human arm | Gezgin, Erkin |
Jul-2012 | Comouter-aided aerodynamic design of small scale horizontal axis wind turbine blades | Göçmen, Tuhfe |
Jan-2014 | Comparison of linear and cfd models with on-site wind measurement data for wind resource assessment | Ay, Aytek |
Dec-2018 | Compliance control of SHAD redundant robot | Kanık, Mert |
Jul-2018 | Compliant control of a teleoperated endoscope robot | Işıtman, Oğulcan |
2009 | Conjugate natural convection heat transfer in a cavity with finite wall thickness | Hakyemez, Erinç |
Dec-2021 | The constitutive and damage models of additively manufactured Ti6Al4V alloy | Hızlı, Burak |
2003 | The control of a manipulator using cerebellar model articulation controllers | Darka, Murat |
Mar-2015 | Control of mechanical joints that have joint clearance | Gündüzalp, Gün |
2005 | Crushing behaviour of aluminum foam-filled composite tubes | Yüksel, Sinan |
2003 | Data driven modeling using reinforcement learning in autonomous agents | Karakurt, Murat |
Dec-2017 | The deformation behavior of a multi-layered aluminum corrugated structure at increasing impact velocities | Sarıkaya, Mustafa Kemal |
Dec-2021 | The deformation rate sensitivities of additively and conventionally fabricated 316L alloys | Enser, Samed |
Dec-2018 | Design and development of a continuously variable transmission system to be used in human-robot interfaces | Mobedi, Emir |
Jul-2019 | Design and experimental evaluation of a dynamically balanced over-constrained planar 6R parallel manipulator | Özkahya, Merve |
2008 | Design and manufacturing of a fireproof fire rescue robot | Tok, Özge |
Jul-2018 | Design and mechanical behaviour of brazed plate heat exchangers | Gürler, Yiğit |
Jul-2019 | Design and numerical analyses of guide vanes of a multistage submersible pump | Demirtaş, Mert |
2004 | Design and optimization of a zero energy building | Gediz, Gamze |
Jul-2021 | Design and optimization of shaft bracket of drum brake for heavy duty vehicle | Çetin, Mert |
Dec-2016 | Design and production of vibration-resistant bolt produced by cold forging | Yaldız, Gökay |
2006 | Design and prototyping of a mechatronic system as a drag reduction device for busses | Kavadar, Gökhan |
Jul-2017 | Design modification of a front window mechanism for the cabin of an earth moving machine | Jovichikj, Radomir |
Jul-2018 | Design of a 2R1T mechanism with remote center of motion for minimally invasive transnasal surgery applications | Yaşır, Abdullah |
Dec-2017 | Design of a deployable structure to be used as temporary ramp | Doğan Kumtepe, Elvan |
2004 | Design of a Mars Rover suspension mechanism | Barlas, Fırat |
Jul-2022 | Design of a physical human-robot interface for lifting operations | Nalbant, Uğur |
2006 | Design of a rescue robot for search and mapping operation | Gümüş Akdemir, Derya |
2009 | Design of a robotic device for automated nucleic acid extraction from biological samples | Çe, Ömer Burak |
2010 | Design of a six degree-of-freedom haptic hybrid platform manipultor | Bilgincan, Tunç |
Jul-2016 | Design of acoustic meta-material sound absorbers by finite element method | Manoğlu, Kaya |
Jul-2022 | Design of an actuation system for a haptic glove | Kurt, Kaan Erol |
Dec-2020 | Design of centrifugal blood pump | Sarızeybek, Ceren |
Dec-2013 | Design of composite-based leaf spring systems for automotive sector | Öztoprak, Nahit |
Dec-2020 | Design of deployable structures comprising Altmann linkages | Yıldız, Görkem |
2005 | Design of geothermal district heating system of Universiade 2005 Athletes' Village | Ünerdem, Yiğit |
Oct-2022 | Design of HIDAM: Highly deployable articulated mast for Positioning of Satellite components | Cebeci, Yunus |
Jul-2018 | Design of hybrid cable-constrained parallel mechanisms for walking machines | Demirel, Murat |
2009 | Design of parallel micromechanisms for knotting operation | Çankaya, Cüneyt |
Jul-2022 | Design of stacker crane for mini-load automated storage and retrieval systems | Bekleviç, Mustafa |
Dec-2021 | Design optimization of an industrial oven heat exchanger | Nergiz, Güven |
Jul-2023 | Design, production and tests of an inherently balanced mechanism to be used as an endoscope holder for endonasal skull base surgery | Yılmaz, Tuğrul |
2009 | Designing and manufacturing of porous spinal cages using Ti6A14V foamed metal | Dizlek, Mustafa Eren |
2007 | Designing and processing of porous Ti6A14V cages for spinal surgery | Hızal, Alpay |
Jul-2023 | Developing the mechanical properties of bio-based films used in food packaging industry | Irak, Ekrem Anıl |
2008 | Development and design of closed-cell aluminum foam-based lightweight sandwich structures for blast protection | Ergönenç, Çağrı |
Jun-2023 | Development and experimental characterization of filament wound hybrid cylindrical structures with enhanced thermal properties | Özarslan, Dora |
Nov-2015 | Development and experimental verification of the stiffness matrix of the HIPHAD haptic device | Taner, Barış |
2011 | Development of a 3-D laminar Navier-Stokes solver for separated channel flows | Ceyhan, Umut |
Jul-2018 | The development of a new testing methodology in dynamic mechanical chracterization of concrete | Seven, Semih Berk |
Jul-2019 | Development of adhesively bonded glass fiber reinforced polypropylene/aluminum based fiber metal laminates (FMLs) | Türkdoğan, Ceren |
Dec-2016 | Development of aluminum honeycomb cored carbon fiber reinforced polymer composite based sandwich structures | Okur, Mehmet Ziya |
2010 | Development of engobe compositions for local roof tiles | Bodur, Hilal |
Dec-2019 | Development of fiber reinforced cylindrical composite structures by filament winding technique | Aydın, Mustafa |
Jul-2023 | The development of forming simulation methodology of a plate type heat exchanger | Şimşek, İbrahim |
Jul-2020 | Development of joining techniques for carbon fiber based polymer matrix composites | İplikçi, Hande |
Dec-2022 | Development of kinetostatic design methodology for airplane flap mechanisms | Arslan, Gökhan |
Jul-2017 | Development of MR-fluid based semi-active dampers to be used in haptic devices | Karabulut, Mehmet Görkem |
Oct-2015 | Displacement analysis of non-circular planar curved beams under in-plane impulsive load | Çelik, Ahmet |
2003 | District heting system of IZTECH Campus and its integration to the existing system | Yıldırım, Nurdan |
Nov-2016 | Dynamic analysis of bolted joints under axial and transverse loads | Güler, Birtan |
2006 | Dynamic analysis of double wishbone suspension | Güler, Duygu |
2010 | Dynamic analysis of flexible mechanisms by finite element method | Ülker, Hakan |
Feb-2017 | Dynamic analysis of non-circular curved beam subjected to moving loads | Emre, Melih |
2011 | Dynamic analysis of planar flexible mechanisms | Çömen, Duygu |
Jul-2017 | Dynamic crushing behavior of sandwich panels with bio-inspired cores | Güzel, Erkan |
Dec-2019 | Dynamic crushing behaviour of cactus geometry inspired core structure | Balya, Ozan |
2012 | Dynamic force measurement techniques Split Hopkinson Pressure Bar testing of low acoustic impedance materials used as armor interlayer materials | Turan, Ali Kıvanç |
Dec-2019 | The dynamic mechanical characterization of a bio-inspired sandwich structure | Ramyar, Ayda |
Dec-2016 | Dynamic modelling and analysis of elevator systems | Berber, Onur |
2006 | The economic analysis of geothermal / absorption cooling of a hospital: Case study of Dokuz Eylül University Research and Application Hospital | Altın, Mete |
2003 | Economic assessment of Balçova-Narlıdere Geothermal District Heating Systems | Erdoğmuş, Abdullah Berkan |
Jun-2021 | The effect of deformation rate on the damage tolerances of nomex honeycomb cored composite sandwiches | Çelik, Muhammet |
2005 | Effect of heat absorbing media on thermal performance of air-type solar collectors | Aydın, Kamil |
Jun-2018 | The effect of material strain rate sensitivity on the shock deformation of an aluminum corrugated core | Canbaz, İlker |
Jul-2022 | The effect of strain rate on the deformation behavior of additively manufactured short carbon fiber reinforced polyamide composites | Zeybek, Mehmet Kaan |
Jul-2018 | The effect of strain rate on the dynamic mechanical behaviour of concrete | Uysal, Çetin Erkam |
Jul-2017 | The effect of T-shaped fin geometries on heat transfer rate enhancement | Çetin, Eylem |
2011 | The effects of light-weight interface material on the stress wave propagation in the multilayered composite armor system | Tunusoğlu, Gözde |
Mar-2018 | Effects of stiffeners on vibrations of fiber-reinforced and laminated composite shells | Sarı, Tansel |
Jun-2023 | Effects of zirconia and hydroxyapatite nanoparticles on the mechanical properties of the resin-based dental composites | Tunca Taşkıran, Senagül |
Dec-2020 | Enhancement of ballistic properties by hybridization method of multi-layered composite panels | Üstün, Hikmet Sinan |
2010 | Enhancement of jet shear layer mixing and surface heat transfer by means of acoustic disturbances | Kor, Orçun |
Dec-2021 | Enhancement of trajectory following accuracy of high acceleration robots by using their stiffness properties | Paksoy, Erkan |
Sep-2022 | Error analysis and characterization of piezoresistive array touch sensors | Sarp, Mehmet Ogün |
2003 | Estimation of the total solidification time of a liquid phase change material enclosed in cylindrical and spherical containers | Bilir, Levent |
2002 | Evaluation of strees intensity factor for an infinite hollow cylinder containing a crack and two rigid inclusions by finite element analysis | Öterkuş, Ertan |
2013 | Evaluation of the performance of a household refrigerator using a variable speed compressor with 1D simulations | Kanargı, Ömer Buğra |
Dec-2019 | Experimental and numerical analysis of the strain rate dependent compressive strength of a cellular concrete | Akyol, Burak |